We are supported by readers, when you click & purchase through links on our site we earn affiliate commission. Learn more.

Enable WPS Button On Spectrum Router (Easy and Quick Steps)

Spectrum is a widely preferred internet service provider across the U.S.A. If you are a Spectrum internet user, you probably have a Spectrum router. Spectrum routers are well-known for their speed, performance, and other features. However, if you use a wireless router, you must know how to enable WPS Button on your Spectrum router.


Wireless connections allow you to use a single network across several devices. As good as it is, it may be a problem as others can connect it. This is where the WPS button comes into play. WPS allows users to connect their devices quickly and may also allow you to prevent others from connecting.


If you do not know how to enable the WPS button on your Spectrum router, don’t worry. This article will teach you how to enable the WPS button on your Spectrum router in simple steps. So what are you waiting for? Go on and read.


What is the WPS button?

Wi-Fi Protected Setup is a button that makes connecting devices to the internet more accessible and swift. It is primarily present in routers that are launched after 2007. It was incorporated for those who did not know how to securely set up their wireless network. It works only with wireless networks encrypted with passwords like WPA or WPA2. A WEP protocol will not support the WPS feature as it isn’t secured.

If your Spectrum Wi-Fi is not working, try turning on the WPS button to improve router efficiency. However, this may not always be the case. You may have to reset your Spectrum router if your Wi-Fi is not working. In such a situation, read how to reset your Spectrum router.

Where is the WPS button located on your router?

WPS button on Spectrum router

Spectrum routers are known for their excellent features. One such feature is the WPS button located on all Spectrum routers. To secure your connection, you must manually enable the WPS button. This brings us to the question, where is the WPS button located on the Spectrum router?


Usually, the WPS button is located on the back of the Spectrum router. However, it may be possible that the WPS button is not present physically. In such a case, there will a virtual enabling option available. Though, if you cannot find the WPS button, it is suggested that you refer to the user manual or contact the Spectrum customer acre.


How to enable the WPS button on Spectrum Router?

The WPS button on your Spectrum router has to be enabled manually. The process of enabling the WPS button on your Spectrum router is pretty simple and easy. Follow the steps below to enable the WPS button on your Spectrum router-

  • After locating the WPS button on your Spectrum router, press it for three seconds and then release it.
  • If your WPS button has lights, then blinking lights on the WPS button means that your connection is working.
  • Ensure that the WPS feature is enabled on your device. To enable it, go to the Wi-Fi setting of your device and go to networks and enable the WPS feature.
  • Once the WPS feature is enabled, your connection will be successful.
  • Use your internet on all your devices without any passwords or pins.

If you have diligently followed the steps mentioned above, then enabling the WPS button on your Spectrum router should not be a problem. Since Spectrum uses different brands of routers, enabling the WPS button on each router may involve a different process. Here is a list of how to enable the WPS button on different Spectrum routers-

Sagemcom Router

Sagemcom Router

You must log into your web interface and choose the 2.4 GHz or 5 GHz Wi-Fi band on Sagemcom to enable WPS. To make it simpler for your devices to connect to the network, we advise you to do this on both bands.

When you select the WPS tab, you’ll see that the first line reads Enable WPS. Turn it on. The second line will have the WPS mode. Both checkboxes—one for pairing with a push button and the other for connecting with a PIN—should be selected. Your router’s back has the PIN if you’d like to connect using that instead.

Askey Wave 2 Router

You must first log into the web interface and go to the Settings section on the home page to enable WPS on Askey. Select the 2.5 GHz or 5 GHz Spectrum Wi-Fi band before turning on WPS. After that, click Start and decide whether to enable WPS using the push button or the PIN.

Arris Router

ARRIS Surfboard G36 Router

Although Spectrum often employs a modem/router combination with Arris routers, the procedure is essentially the same and is unaffected. So, select the Basic Setup tab once you’re in the online interface.

Check the box next to WPS Enable; no toggle option is available. The Encryption Mode has a drop-down option. You can use the PIN or PBC (Push Button Control). Choose the option you desire. You will receive WPS access no matter what you decide.

Netgear Router

To enable WPS on Spectrum Netgear router, enter your credentials at www.routerlogin.net. Once there, pick the ADVANCED tab and then choose the WPS Wizard. Next, choose between the Push button and PIN after clicking Next. Click next, and you’re done.

SMC 8014 Cable Modem

Spectrum’s SMC 8014 cable modem gateway may not have the WPS feature. However, the SMCD3GN has the WPS feature, and you may enable it by pressing the WPS button. When you reach the SMC web interface’s home page, select Wireless Settings and then WPS. Just choose Enable from the WPS Configuration section when it appears. Once more, you’ll need to decide between using the button or the PIN. Once you are done, WPS will be enabled.

The WPS button on the Spectrum router is still not working

If the WPS button on your Spectrum router is still not working, then it means there are some glitches, like service outages in your area. However, if this is not the case, then follow the steps below to troubleshoot the WPS button on your Spectrum router-

  • Repeat the previous steps after turning your router off for 30 seconds and then turning it back on. Try the steps listed below if this still doesn’t work.
  • Use your default network login and password to log into Spectrum. Your username and password are probably located on the back of your router.

Admin is a typical example of a generic username that you might find. Try abcd as a password.

  • Navigate to the Wi-Fi settings menu after joining the default network.
  • Use your arrow keys to navigate the network settings option, then click on network settings. Pick the network configuration option. There should be two choices: simple or complex. To finish the setup, choose the simple option and follow the instructions.
  • Now, you ought to be able to connect, and the blinking lights will stop after you successfully connect.

Hopefully, the WPS button on your Spectrum router is enabled, and you can connect with your devices.

Frequently Asked Questions

WPS or Wi-Fi Protected Setup is essential for a secure, fast and reliable connection. A home user who doesn’t want to bother about memorizing numerous passwords and usernames is the primary customer for the WPS network. WPS networking is secure enough to be used at home and among family members. Knowing how to enable the WPS button on your Spectrum router is not challenging if you have a Spectrum router.


The process of enabling the WPS button is pretty straightforward. Follow the instructions mentioned above, and we assure you you will not experience any difficulties. We have also provided steps to troubleshoot your WPS button in case it is not enabled. However, if the problem persists, we suggest you contact Spectrum customer care to help you out.

Leave a Comment